Exemple de projet facile avec une carte Arduino UNO .
Voici une petit exemple de code pour faire clignoter une LED , le langage de programmation utilisé C arduino , ce logiciel permettant de compiler le code et de le déployer sur l’Arduino UNO .
CODE /
// the setup function runs once when you press reset or power the board
void setup() {
// initialize digital pin 13 as an output.
pinMode(13, OUTPUT);
}
// the setup function runs once when you press reset or power the board
void setup() {
// initialize digital pin 13 as an output.
pinMode(13, OUTPUT);
}
// the loop function runs over and over again forever
void loop() {
digitalWrite(13, HIGH); // turn the LED on (HIGH is the voltage level)
delay(500); // wait for a second
digitalWrite(13, LOW); // turn the LED off by making the voltage LOW
delay(500); // wait for a second
}
void loop() {
digitalWrite(13, HIGH); // turn the LED on (HIGH is the voltage level)
delay(500); // wait for a second
digitalWrite(13, LOW); // turn the LED off by making the voltage LOW
delay(500); // wait for a second
}
Circuit de Arduino avec resistance+LED /
0 commentaires:
Enregistrer un commentaire